Great value direct 900 x 450 hot water copper cylinder (36x18 approx inch measurement) height and diameter measurement does not take lagging into account (see below).

Complies with current building regulations (Part L), is ERP band C and included in the price is a 2 year guarantee. 

The cylinder price includes VAT and is available to ship ASAP

• All connections 1inch BSP for 22mm pipe, except immersion boss which is 2.25inch BSP. 
• 2 Year Manufacturer Guarantee (Mannley Cylinders)
• Price Includes VAT
• Manufactured in West Yorkshire, UK.
• Suitable for 10m working head. Higher pressure/working head may require a different grade of cylinder which affects cost, please call 0113 871 5 871 or email sales@coppercylinder.co.uk to discuss.
• The reheat times shown in the table below are the approximate times taken to raise the entire contents of the cylinder from 10 to 60°C using a single 3 kW immersion heater.
• Cylinder includes FlexiLag Insulation - 35mm comes as standard making the overall diameter 520mm. Thicker (50mm) lagging is available on the checklist.
• Part L Compliant
• Produced under BS EN ISO 9001:2000 Quality Systems
• 36 x 18 inches
• Tank can hold approximately 120 litres of water
• Boiler connections at 100mm and 700mm (these can be blanked off if you wish to heat solely by immersion heater)
• Top entry immersion boss offset to hot out which is directly on top of the cylinder
• An extra immersion boss can be added to this order (see checklist above) so it can be powered by two immersion heaters
• Can be made in stainless steel instead of copper (next day delivery not available for stainless)

Please see diagram (schematic may differ slightly to cylinder, all measurements +/- 10mm) and chart below for more information, you can also speak to a sales advisor on 0113 871 5 871 or sales@coppercylinder.co.uk

Customising Your Cylinder

If you’re replacing a hot water cylinder we can make the job a little easier by creating a customised size cylinder and where the location of the connections should be. Click here to download our custom cylinder form and mark on as much information as possible. Once this is complete you can email it to sales@coppercylinder.co.uk for a quote.

At coppercylinder.co.uk we keep our prices low by manufacturing all orders received through our store rather than keeping stock of vented copper cylinders. Every cylinder is tailor-made specifically to your requirement therefore we do not accept returns of any incorrectly ordered cylinders. If there is anything you are unsure of please don't hesitate to contact us 0113 871 5 871 or sales@coppercylinder.co.uk. See terms and conditions for further info.