Loading... Please wait...
  • Image 1

1200 (48") x 450 (18") Direct Combination Cylinder (Economy 7)

Price: (Inc VAT)
£338.89 (inc VAT) £282.41 (exc VAT)
Shipping:
Free Shipping
Quantity:

Product Description

Great value direct 1200 x 450 combination economy 7 hot water copper cylinder (48x18 approx inch measurement) height and diameter measurement does not take lagging into account (see below).

Complies with current building regulations (Part L), is ERP band C and included in the price is a 2 year guarantee. 

The cylinder price includes VAT and is available to ship ASAP

  • Economy 7: designed to make the most of off-peak tariffs.
  • All units fitted with 2 immersion bosses (immersion heaters can also be ordered on the tick list above). One boss is at the bottom, one further up the cylinder.
  • Bottom immersion designed to heat the whole of the cylinder on the overnight economy tariff. 
  • Top immersion designed to boost the heat in the water during the day if required
  • All connections 1inch BSP for 22mm pipe, except immersion bosses which are 2.25inch BSP. 
  • 2 Year Manufacturer Guarantee (Mannley Cylinders)
  • Price Includes VAT
  • Manufactured in West Yorkshire, UK.
  • Suitable for 10m working head. Higher pressure/working head may require a different grade of cylinder which affects cost, please call 0113 871 5 871 or email sales@coppercylinder.co.uk to discuss.
  • Cylinder includes FlexiLag Insulation - 50mm comes as standard with economy 7 making the overall diameter 550mm. Thinner lagging (35mm) is available on the checklist.
  • Part L Compliant
  • Produced under BS EN ISO 9001:2000 Quality Systems
  • 48 x 18 inches
  • Tank can hold approximately 115 litres of hot water and 40 litres of cold
  • Please note, overflow and ball balve fittings are not included with this cylinder. It is possible for us to make holes for the 15mm balve valve and 22mm overflow on request but we need to know where they are on the cylinder so please email over a filled in bespoke cylinder sheet with the order (click here) if this is what you need.

Please see diagram (schematic may differ slightly to cylinder, all measurements +/- 10mm) and chart below for more information, you can also speak to a sales advisor on 0113 871 5 871 or sales@coppercylinder.co.uk

dce7-1.pngdce7-2.png

Returns:

Please note: this cylinder is unavailable for return as per our terms and conditions section 4: https://www.coppercylinder.co.uk/terms-conditions/ .

Customising Your Cylinder

If you’re replacing a hot water cylinder we can make the job a little easier by creating a customised size cylinder and where the location of the connections should be. Click here to download our custom cylinder form and mark on as much information as possible. Once this is complete you can email it to sales@coppercylinder.co.uk for a quote.

At coppercylinder.co.uk we keep our prices low by manufacturing all orders received through our store rather than keeping stock of vented copper cylinders. Every cylinder is tailor-made specifically to your requirement therefore we do not accept returns of any incorrectly ordered cylinders. If there is anything you are unsure of please don't hesitate to contact us 0113 871 5 871 or sales@coppercylinder.co.uk. See terms and conditions for further info.

Write your own product review

Product Reviews

  1. Amazing Value 5 Star Review

    Posted by on 17th Aug 2018

    Brill just what we needed. Delivered next day


  2. excellent service 5 Star Review

    Posted by on 26th Oct 2015

    From start to finish dealing with your company was really good. Fitted the tank today no problems.


  3. does the job. 4 Star Review

    Posted by on 14th May 2014

    I wanted an economy 7 cylinder and bought this. What I got was an Economy 7 cylinder with extra direct flow/returns. These had to be blanked off. The rest was ideal, 22mm hot supply, 15mm threaded drain tap and two immersion heater bosses. The position of all the bosses was not ideal. looking down from the top, using the cylinder as an imaginary clock face, the immersion heaters are at six o'clock, the flow/return bosses are at three o'clock and the hot water and drain off bosses are at nine o'clock. When placed in my narrow cupboard so access to the immersions and their eventual replacement can take place and have access to the drain off, the two flow/return bosses are out of sight and are unable to be accessed without the removal of the tank, should they leak etc. In a wider cupboard this problem would not be apparent. having said that the tank is in and working well. The float valve needed bracing as the cold water tank wall is thin and allows the valve to bounce when filling. The foam lagging had been cut to access the bosses fitted but needed extra cutting as these cut outs were less than accurate, allowing for the immersion heater box spanner etc. I phoned rather than order off the net, staff were friendly and the tank arrived on the morning that was stated, well packaged in a box and lined in metres of bubble wrap.


  4. Excellent Service 5 Star Review

    Posted by on 3rd Jun 2013

    A pleasure doing business with you. Very impressed with delivery updates. Many thanks GRW


  5. combination 4 Star Review

    Posted by on 10th Mar 2013

    cylinder turned up well wrapped and on time (yes it really is a 24 hrs turn round). The foam lagging needed some trimming around the immersion heater bosses (as do most pre lagged cylinders, which is a pity when just a larger blind would make it neater). The tank lid is a nice tight fit. The tank is not supplied with a bylaw 30 kit so bear that in mind.
    A good product delivered on time. Will purchase from this company again



All prices are in GBP Copyright 2020 Copper Cylinder. Sitemap | Web design by Easytech